HICTOP CR-10 3D Printer Prusa I3 DIY Kit Aluminum Large Print Size 300x300x400mm

July 1, 2017 - Comment

Product Specifications: Extruder quantity: 1 Molding: FDM Body Structure: Imported V-Slot Aluminum Bearings Nozzle Diameter:Standard 0.4mm Printing Method: SD card(off-line), contact to the PC(online) LCD screen: 3 inch LCD screen with aircraft knob Power supply: input: 110-240V output: 12V Hot bed: Industrial grade aluminum alloy platform, 3mm special tempered glass Operating Software:CURA、Repetier-Host simplify 3D Software

Buy Now! $448.00Amazon.com Price
(as of 5:00 pm UTC - Details)

Product Specifications:
Extruder quantity: 1
Molding: FDM
Body Structure: Imported V-Slot Aluminum Bearings
Nozzle Diameter:Standard 0.4mm
Printing Method: SD card(off-line), contact to the PC(online)
LCD screen: 3 inch LCD screen with aircraft knob
Power supply: input: 110-240V output: 12V
Hot bed: Industrial grade aluminum alloy platform, 3mm special tempered glass
Operating Software:CURA、Repetier-Host simplify 3D
Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
Cura language: English
Interface language: English
Format : STL, G-Code
Operating System: Linux, Windows, OSX

Product Parameter:
Printing Size: 300*300*400mm
Printing accuracy:±0.1mm
Layer thickness: 0.05-0.4mm (adjustable)
Nozzle temp: 250 degree
Extruder temperature: PLA: 210
Hot bed temperature: PLA: 50
Printing Speed:Normal: 80mm/s, Max.: 200mm/s
Materials:1.75mm PLA

Packing details:
Product Size: 490*600*615mm
Package Size: 540*640*310 mm
Net Weight: 10.3kg
Gross Weight: 14kg
Working condition temp: 10-30℃, Humidity:20-50%

Package content:
a. HICTOP 3D printer DIY kits (including build plate and tempered glass)
b. Spare screws and Wrench kits
c. Assembly instructions and user manual.
d. SD card*1
e. 0.2kg PLA Filament

Product Features

  • EASY ASSEMBLY: Delivery with three sets, just need about 10 minutes to assemble well.
  • PRINTING SIZE: Prints max size of 300X300X400mm. No longer will you be limited to small models.
  • LONG SERVICE LIFE: Imported Linear navigation with low friction. Industrial-grade PCB can continuously print for 200 hours without pressure
  • HEATING BED: Industrial grade aluminum alloy platform&special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy to take out the model.
  • EASY WIRING: Wires are already connected to the control board & cables are also attached,easy for wiring.

Comments

Amazon_Customer says:

Easy to assemble, great working 3D printer I waited to write this review until I’d had a chance to print several long prints (28hrs long) so that I could give a true review. Out of the box, it was easy to put together which isn’t true of most 3D printers, so this one was way above the rest in that respect. There was quite a smell to it when we opened it, but I’m sure that was just the materials and manufacturing and with the help of a fan and ventilation we were able to air it out just fine. Just be warned, it smelled very bad at first. Before you assemble the printer, I suggest you take out the included microSD card and provided adapter and read through the material there. It isn’t extensive, but it does even include a video on printer assembly. A couple of screws had came loose during shipping, so we did need to figure out where they came from and reattach them but it wasn’t a big ordeal or anything. Calibration on this printer takes time, but that isn’t any different than any other printer of this style. You can use the…

Fred says:

The unit came and it really does only take a … The unit came and it really does only take a few minutes to put it together. Everything is prefabricated and all you do is plug the connectors on the wires into the connectors on the motors. You also have to connect the horizontal aluminum frame to the base with a few bolts (4) and brackets on each side. That’s it.Gotchas: 1) It comes on 220 volts. In the US, you need to flip the switch to 110. 2) The instructions don’t tell you to connect the white Teflon tube to the Extruder motor (motor on the top part). Push the tube into the white part on the side and fish the filament through from the other side. The spring on it lets you pull it back out if you press it. BTW, software instructions are on the SD card.

JPG says:

Awesome printer for the price This is essentially a Black/Blue Creality CR-10 (it even has Creality stamped on the stepper motors) but it has a HICTOP manual, HICTOP sticker on the control box (which came off with the protective plastic anyway), and a four-leaf clover test model instead of the lucky cat on the SD Card. Beyond those differences, it’s exactly the same. 

Write a comment

*